Sc Series Aluminum Double-Acting Sandard Air Pneumatic Cylinder

• Material: Aluminum
• Usage: Automation and Control, Robot
• Structure: General Cylinder
• Power: Pneumatic
• Standard: Standard
• Pressure Direction: Double-acting Cylinder
• Model NO.: sc
• Double-Acting Cylinder Type: Common Cylinder
• Transport Package: Pallet
• Specification: cylinderbore 32mm/40mm/50mm/63mm/80mm/100mm
• Trademark: ZEBOYI
• Origin: China
• HS Code: 8412310090
• Production Capacity: 20000pieces/Years

Product Description

Basic Info.
Specification parameters

Order Code

Product Features

1. Standard cylinder manufactured by our enterprise.
2.The sealof piston adopts heterogeneous two way seal structurelt's dimension is tight and it has the function of greasereservation.
3.lt is tie rod cylinder. The cylinder barrel and front/rear cap isjointed by tie rods with high reliability.
4.Compared withISO15552 standard cylinder, SC series cylinderwith the same bore size is shorter.
5.The buffer adjustment of cylinder is smooth and steady.
6.Cylinders and mounting accessories with severalspecificationsare optional.
7.The seal material with high temperature resistance is adopted,operating temperature range is 0~150C

Standard stroke parameters
 
Installation and Usage
1.When load changes in the work, the cylinder with abundant output capacity shall be ed
2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosenunder the condition of high temperature or corrosion.
3.Necessary protection measure shall be taken in the environment with higher humidity, muchdust or water drops, oil dust and welding dregs.
4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline toprevent the entrance of particles into the cylinder.
5.The medium used by cylinder shall be filtered to 40um or below.
6.Anti-freezing measure shall be adopted under low temperature environment to preventmoisture freezing.
7.The cylinder shall be carried out test run without load before application. Prior to run, buffershall be turned to the minimum and gradually released to avoid the damage on cylindercaused by excessive impact.
8.The cylinder shall avoid the influence of side load in operation to maintain the normal workof cylinder and extend the service life.
9.lf the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment tothe surface. Anti-dust caps shall be added in air inlet and outlet ports

Product Parameters