Product Description
TCM CYLINDER SERIES
Order Code
Specification parameters
Cylinderbore(mm) 12 16 20 25 32 40 50 63 |
Working medium |
Air (filtered by more than 40μm) |
Mode of movement |
Double acting type |
Proof pressure |
1.5MPa |
Maximum operating pressure |
1.0MPa |
Operating ambient temperature |
5~60ºC |
Movement speed |
50~500mm/s |
Buffer form |
Rubber bumper |
Stroke tolerance |
+1.5mm |
bearing |
Sliding bearing/ball bearing |
Precision of piston rod not rotating |
Sliding bearing |
±0.08° |
±0.07° |
±0.06° |
±0.05° |
ball bearing |
±0.1° |
±0.09° |
±0.08° |
±0.06° |
Connection diamete |
M5×0.8 |
PT1/8 |
PT1/4 |
Product Features
1.Implement the JIS standard
2. Two guide rods made of special bearing steel, guided by linear bearings or bronze bearings, with high resistance to torsion and lateral load ability
★ note: steel ball linear bearing: suitable for cylinder lifting, or situations requiring high precision and high bearing capacity, especially for situations requiring low friction movement.
Bronze sliding bearing: suitable for cylinder braking and other radial load resistance occasions, compared with the general brake cylinder more than 2 times higher resistance to lateral impact, and has a greater torsional stiffness.
3. The drive unit and the guide unit are designed in the same body, no additional accessories are needed, the minimum space requirement is needed, and the air intake interface is optional, so the installation is more convenient.
4. There are two precise positioning holes on the bottom surface of the body, the rear end face of the body and the fixing plate (see Φ PA hole and XX in the outline diagram).
Hole), for the occasion of higher precision demand, provide higher precision positioning installation; 5, the four magnetic induction switch grooves on the body, provide a variety of induction switch installation methods; 6, the special design of the body, provide multi-directional installation fixed type.
Standard stroke parameters
Product Parameters